WorkBee CNC Router Machine Full Kit

$0.00$1,099.00

The WorkBee is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine.

Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and Tr8*8(P2) Lead Screws it is strong, accurate and reliable.

Please note:

  • High Torque Stepper Motors are recommended with the 2.2kW Water Cooled Spindle.
  • With the GRBL Controller bundle we recommend using external stepper drivers when pairing with High Torque Stepper Motors in order to utilise them at their maximum capacity.
Clear

Description

The Bulk Man 3D WorkBee was originally designed by Ryan Lock of Ooznest UK, and it incorporates many upgrades. It is a super-strong, accurate and easy to assemble CNC machine.

The WorkBee CNC design has gone through different changes. WorkBee Version 1 originally had the leadscrews placed in compression. All Bulk Man 3D’s WorkBee kits now sold are Version 2.2, with the major differences being the use of leadscrew tensioner and longer leadscrews in the X and Y Axis. This helps to solve the problem of Whipping when for long length or faster Speed. 

It has been carefully designed and can accurately cut foams, woods, plastics and aluminium to 0.1-0.2mm accuracy or better.
With a WorkBee CNC Kit you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop.

Compatible Material for Cutting/Milling

Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam

Frame Size Working Area
500 x 750mm 300 x 520mm
750 x 750mm 550 x 520mm
750 x 1000mm 550 x 770mm
1000 x 1000mm 800 x 770mm
1000 x 1500mm 800 x 1270mm
1500 x 1500mm 1300 x 1270mm                    


Z Height

54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard.
The spoilerboard supports have two height configuration, these are the maximums for each configuration.

Motion
Drive System – ACME Lead Screws Or GT3 Timing Belts
Linear Guides – Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.
Motors – NEMA23 1.26N.m or Nema23 High Torque 2.45N.m Stepper Motors (X, Y & Z)
Accuracy – 0.05 – 0.10mm (Screw Driven) Or 0.10 – 0.20mm (Belt Driven)

This Kit Includes
  • WorkBee CNC Mechanical Kit
  • 4 x Nema23 Stepper Motors / 4 x Nema23 High Torque  Stepper Motors / No Motors
  • GRBL or Mach 3 Controller Bundle
  • Cable Drag Chain Bundle
  • 1.5kW/2.2kW Air Cooled or Water Cooled Spindle Bundle
  • All Extrusions are M5 Tapped as where it is necessary

Please note:

  • MDF Working Table and Drill Bits are Not included with this kit.
  • We do not provide technical support for software debugging.
  • Mach3 License is not included with this kit. This License can be purchased directly from the official website.
  • Any Mains power connections must be installed by a Licensed electrician or suitability qualified person.

Specs of Nema23 (1.26N.m) Stepper Motor

  • NEMA 23
  • Shaft Size: 1/4″
  • Step Angle: 1.8
  • Holding Torque: 1.26 N.m
  • Rated voltage: 3.36 V
  • Rated current: 2.8 A

Specs of Nema23 High-Torque (2.45N.m) Stepper Motor:

  • NEMA 23 (High Torque)
  • Shaft Size: 1/4″
  • Step Angle: 1.8
  • Holding Torque: 2.45N.m
  • Rated voltage: 3.6 V
  • Rated current: 2.8 A

Specs of 1.5 kW Air/Water Cooled Spindle:

  • 1.5kW Air Cooled Spindle Net weight: 2.6kg
  • 1.5kW Air Cooled Spindle Spec: φ 65 x 205 mm
  • 1.5kW Water Cooled Spindle Net weight: 4.2kg
  • 1.5kW Water Cooled Spindle Spec: φ 80 x 205 mm
  • Power: 1.5 kW
  • Voltage: 220 ~250 V or 110 V
  • Frequency: 400 Hz
  • Speed: 8000-24000 R/min
  • Air/Water Cooling
  • Run-out off: less than 0.005 mm
  • Grease Lubrication
  • VFD Inverter 1.5 kW 220 V or 110 V
  • Collet: ER11

Specs of 2.2 kW Water Cooled Spindle:

  • Net weight: 5.3kg
  • Spindle Spec: φ 80 x 215 mm
  • Power: 2.2 kW
  • Voltage: 220 ~250 V or 110 V
  • Frequency: 400 Hz
  • Speed: 0-24000 R/min
  • Water Cooling
  • Run-out off: less than 0.005 mm
  • Grease Lubrication
  • VFD Inverter 1.5 kW 220 V or 110 V
  • Collet: ER20
    Sizes: 1mm, 2mm, 1/8″, 4mm, 5mm, 6mm, 1/4″, 7mm, 8mm, 9mm, 10mm, 11mm, 1/2″, 13mm

    Note: Maximum recommended speed for Lead Screws 1000mm or greater is 400RPM.

    Manuals and other resources for WorkBee are available here.

    Additional information

    Weight N/A
    Dimensions 158 × 20 × 20 cm