Description
This UC300 Controller Bundle with IHSV57 180W 3000rpm Servo Motors contains all the hardware for powering and controlling your ULTIMATE Bee, QueenBee, WorkBee, Ox CNC or other CNC machine.
The UC300 is the upgrade to the NVUM CNC controller. It is developed by Digital Dream and used for 4-Axis CNC Machines. The controller is compatible with a standard MPG Pendant and has many inputs and outputs. If you want to use Mach3 or DrufelCNC then we recommend this controller.
Part List：
- 1x 57HSE3N 3Nm Motor with 5-meter motor cable and 5-meter encoder cable
- 1x HBS57 Stepper Motor Drive
- 3x 57 Integrated Servo Motor 180W 3000rpm
- 1x 2 core DC cable for motor driver to power supply (Z-Axis)
- 1x 4 core shielded cable (Z-Axis Driver Signal)
- 3x 4 core shielded cable (X,Y,A Driver Signal)
- 3x 2 core DC cable for motor driver to power supply (X,Y,A)
- 1x 4 Pin EDG through wall connector
- 1x 6 Pin EDG through wall connector
- 2x 2 core DC cable for E-Stop Switch and controller
- 3x 2 core shielded cable (X,Y,Z).
- 1x UC300 Controller
- 3x Limit Switch Kits
- 1x E-Stop Switch
- 2x Mean Well Power Supply 36V 450W
- 1x Mean Well Power Supply – 24V 50W1x 12 Row Screw Terminal Block
- 1x Inrush Current Limiter – ICL-28L
- 1x Single Core Hook Up wire. (Black)
Details of Digital Dream UC300 Controller:
- Motion control 3-6 Axis (X, Y, Z, A, B, C).
- USB Communication with Mach 3 Software.
- Control Board and IO’s optocoupler-isolated.
- Max 300khz stepper motor pulse output – suitable for most CNC milling machine system.
- USB included
57 Integrated Servo Motor ：
- Model: IHSV57-30-18-36-01-BY
- Size: 52 x 76 x 148mm (2 x 3 x 5.8″)
- Applicable motor: for iHSV57-30-18-36
- Input voltage: 20~50V DC (Typical Value 36V)
- Power: 180W
- Shaft Diameter: 8mm
- Torque: 0.6NM
- Rated Speed: 3000
- Impedance: 0.53±10%Ω
- Continuous output current: 6A
- Speed response frequency: 50KHz
- Peak torque: 1.71
- Maximum pulse frequency: 250K
- Default rate: 9.6Kbps (Required external conversion interface)
- Cooling mode: Natural cooling or forced air cooling
- Typical applications: CNC, printing, laser, textile machine, etc
57HSE3N 3Nm Motor：
- Motor model: 57HSE3N
- Motor current: 3.5A
- Output torque: 3N.m
- Body length: about 132MM
- Shaft diameter: 8MM, no keyway
- Outletmode: single output shaft
- Rated speed: 1000 rpm (no-load speed: 2000 rpm)
- Outlet mode: two-phase four-wire (must be wired according to motor label)
HBS57 Stepper Motor Drive：
- Drive Model: HBS57 (Nema 23, for 57 stepper motor)
- Pulse Signal: 3.3V/5V/24V compatible. No string resistor required
- Voltage Range: DC16-70V (New Version: DC24-80, send in random)
- Subdivision Setting: 800-51200 subdivision
Mean Well Power Supply 36V 450W
- Output Voltage-Channel: 36V
- Output Power: 450W
- Enclosed Case
- Input Voltage: 90 VAC ~ 132 VAC/180 VAC ~ 264 VAC selected by SW, 254~ 370 VDC
- Output Current-Channel: 0~12.5A
- Input Frequency: 47 Hz to 63 Hz
- Mounting Style: Chassis
- Length: 225 mm
- Width: 124 mm
- Height: 50 mm
Mean Well Power Supply – 24V 50W
- Output Voltage-Channel: 24V
- Output Power: 50W
- Enclosed Case
- Input Voltage: 85 VAC to 264 VAC, 120VDC to 373 VDC
- Output Current-Channel: 2A
- Mounting Style: Chassis
- Length: 99 mm
- Width: 82 mm
- Height: 30 mm
- Input Frequency: 47 Hz to 63 Hz
- Unit Weight: 230 g
Limit Switch Kits
- 3 x Micro Limit Switch
- 3 x Limit Switch Plate
- 6 x M3 10mm Cap Head Screw
- 6 x M5 8mm Cap Head Screw
- 3 x M5 Drop-in Tee Nut
- NOTE: The holes in the switch will need to be opened a little (3mm drill bit) to allow for the M3 screw or alternatively you can use a M3 tap to cut a thread into the plastic
E-Stop Switch
- Max Current: 10A
- Max Voltage AC 660V
- Rated Load:
- AC: 220VAC/6A, 380VAC/4A, 660VAC/2A
- DC: 440VDC/0.3A,220VDC/0.5A, 110VDC/1A
- TYPE: N/C
- Withstand Voltage: 2500V /60S
- Temperature: -25°~+55°
- Contact resistance:<25mΩ
57 Integrated Servo Motor 180W 3000rpm 0.6Nm
Features:
① Full Closed Loop
- Precise position and speed control to meet the most demanding application requirements.
- Highly robust servo control can adapt to a wide range of inertial loads and frictional load changes.
- High-resolution encoder provides accurate position accuracy.
② Low Heating / High Efficiency
- Adjust the current in real-time according to the actual load conditions to minimize heat generation.
- The current is almost zero and no heat at rest.
- Close to 100% torque output capacity, maximizing the energy conversion rate in the most compact space, which is in low power consumption and high efficiency.
③ Smooth and Accurate
- Based on the encoder space vector current control algorithm, it has excellent performance in the full speed range. Even at low speed applications, it can maintain a smooth and quiet operation.
- Ensure accurate positioning both during operation and at rest.
④ Exercise Monitoring
- For some applications where real-time motion has extremely demanding accuracy requirements, JMC servo debugging software provides a simple and practical tool for monitoring the actual trajectory.
- Can be used to monitor commonly used indicators such as actual speed and position error, as a rating system current actual performance.
- The interface of interactive monitoring and tuning can get the most optimized performance output as quickly as possible.
ALM and PEND Signal Output Ports
Control Signal Input Ports
Power Interface Port
Please note:We sell to businesses for bulk order quantity please contact sales@bulkman3d.com for special distribution pricing.
