Description
This UC300 Controller Bundle with 3N.m Closed Loop Stepper Motors contains all the hardware for powering and controlling your ULTIMATE Bee, QueenBee, WorkBee, Ox CNC or other CNC machine.
This UC300 Controller Bundle will allow you to use a Digital Dream UC300 Controller with a 4-axis machine CNC machine using MACH3 software.
Features of 3N.M Close Loop Stepper Motor:
- Low heat (static, the current is almost zero, no heat).
- Smoothing (based on the feedback vector space vector current control algorithm and vector smoothing filtering technology, the traditional stepping motor troubled low frequency resonance has a very good resistance).
Part List：
- 4pcsx HBS57 Stepper Motor Drive
- 4pcsx 57HSE3N 3Nm Motor with 5-meter motor cable and 5-meter encoder cable
- 4pcsx 2 core DC cable for motor driver to power supply (Z-Axis)
4pcsx 4 core shielded cable for motor driver to controller (X,Y,A,Z)- 4pcsx 4 Pin EDG through wall connector
- 4pcsx 6 Pin EDG through wall connector
- 2pcsx 2 core DC cable for E-Stop Switch and controller
- 3pcsx 2 core shielded cable for limit switch kits (X,Y,Z)
- 1pcsx UC300 Controller
- 3pcsx Limit Switch Kits
- 1pcsx E-Stop Switch
- 1pcsx Mean Well Power Supply 36V 600w
- 1pcsx Mean Well Power Supply – 24V 50W
- 1pcsx 12 Row Screw Terminal Block
- 1pcsx Single Core Hook Up wire. (Black)
Details of Digital Dream UC300 Controller:
- Motion control 3-6 Axis (X, Y, Z, A, B, C).
- USB Communication with Mach 3 Software.
- Control Board and IO’s optocoupler-isolated.
- Max 300khz stepper motor pulse output – suitable for most CNC milling machine system.
- USB included
Details of 57HSE3N 3Nm Motor:
- Motor model: 57HSE3N
- Motor current: 3.5A
- Output torque: 3N.m
- Body length: about 132MM
- Shaft diameter: 8MM, no keyway
- Outletmode: single output shaft
- Rated speed: 1000 rpm (no-load speed: 2000 rpm)
- Outlet mode: two-phase four-wire (must be wired according to motor label)
Details of Stepper Drive HBS57:
- Drive Model: HBS57 (Nema 23, for 57 stepper motor)
- Pulse Signal: 3.3V/5V/24V compatible. No string resistor required
- Voltage Range: DC16-70V (New Version: DC24-80, send in random)
- Subdivision Setting: 800-51200 subdivision
- The new 32-bit DSP digital 57 closed-loop stepper motor driver, engraving machine, CNC equipment available. PWM current control, low noise, high speed torque is 40% larger than ordinary drives.
Power Supply 1: Mean Well Power Supply 36V 600W
- Output Voltage-Channel: DC36V
- Output Power: 600W
- Enclosed Case
- Input Voltage: AC110/220V ±15%
- Output Current-Channel: 16.7A
- Mounting Style: Chassis
- Length: 215 mm
- Width: 113 mm
- Height: 50 mm
- Output Frequency: 50/60Hz
- Efficiency: more than 80%
Power Supply 2: Mean Well Power Supply 24V 35W
- Output Voltage-Channel: 24V
- Output Power: 36 W
- Enclosed Case
- Input Voltage: 85 VAC to 264 VAC, 120VDC to 373 VDC
- Output Current-Channel: 1.5A
- Mounting Style: Chassis
- Length: 99 mm
- Width: 82 mm
- Height: 30 mm
- Input Frequency: 47 Hz to 63 Hz
- Unit Weight: 230 g
Limit Switch Kits
- 3 x Micro Limit Switch
- 3 x Limit Switch Plate
- 6 x M3 10mm Cap Head Screw
- 6 x M5 8mm Cap Head Screw
- 3 x M5 Drop-in Tee Nut
- NOTE: The holes in the switch will need to be opened a little (3mm drill bit) to allow for the M3 screw or alternatively you can use a M3 tap to cut a thread into the plastic
E-Stop Switch
- Max Current: 10A
- Max Voltage AC 660V
- Rated Load:
- AC: 220VAC/6A, 380VAC/4A, 660VAC/2A
- DC: 440VDC/0.3A,220VDC/0.5A, 110VDC/1A
- TYPE: N/C
- Withstand Voltage: 2500V /60S
- Temperature: -25°~+55°
- Contact resistance:<25mΩ
Please note:We sell to businesses for bulk order quantity please contact sales@bulkman3d.com for special distribution pricing.
