Drill Tap 1/4″ M5

US$4.13US$2,070.00

Get your driver and load it with our Drill Taps, these are especially good for tapping the ends of any of our V-Slot or C-Beam Linear Rail fast.

 

Clear
SKU: TL0004-M5 Category: Tags: ,

Description

Get your driver and load it with our Drill Taps. These are especially good for tapping the ends of any of our V-Slot or C-Beam Linear Rail Fast.

Specifications:
  • 100% Brand New and High Quality.
  • Model: TL0004-M5
  • Material: Aluminium Alloy
  • Size: M5*0.8 mm
  • Type: Hex Shank Screw-driven
  • Screw type: Spiral Countersunk thread
  • Pitch: 0.8 mm

Features

  • Suitable for drilling, tapping, cutting on soft metal, aluminium plate, iron, etc.
  • Fast replacement composite cone, uses drill edged principle.
  • Drills and Taps in a one-step process, greatly save processing steps and time costs, improving working efficiency.
  • Self-centring point, do not need assistant centre drilling or centre punching
  • High hardness, rustproof, solid and durable.

Pro-Tip: Be sure that your drill is on the low setting and you can keep the tap straight as you go in slowly (do not force) and then reverse out. It may take a few times of going in and out to get to your desired depth. Use cutting oil to make the process even smoother.

Sold in the following quantity

Per Piece Quantity Total
$ 2.07    1000  $ 2070
$ 4.13      1  $ 4.13

 

Additional information

Weight 0.005 kg
Dimensions 10 × 10 × 10 cm
Quantity

1, 1000

Size

M5 x 0.8 mm