$0.05 – $30.00
These M5 Jam Nuts are great for when you need a nut with a thinner (2.9mm) profile or use 2 as lock nuts.
These M5 Jam Nuts are great for when you need a nut with a thinner (2.9mm) profile or use 2 as lock nuts.
Used in our Anti-Backlash Nut Block locking the set screw in place.
They also fit inside the slot of our V-Slot Linear Rails and can work as a tee-nut in a pinch.
| Per Piece | Quantity | Total |
| $ 0.03 | 1000 | $ 30.00 |
| $ 0.05 | 1 | $ 0.05 |
| Weight | 0.001 kg |
|---|---|
| Dimensions | 2 × 2 × 1 cm |
Used this Jog Knob to fine tune your machine’s position. Simply attach the jog knob to the 8mm Acme Lead Screw and tighten using the included M4 set screws.
These SHF8/10/12/16 Supports are usable with 8/10/12/16mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place.
The 8 mm Acme Anti-Backlash Nut Block is a great choice for many projects requiring lead screw linear motion.
The pitch and diameter are a perfect combination of high torque and speed.
These rubber end stops are perfect for placing on the ends of a linear rail to stop the carriage from running too far.