The End Stop Switches are customized high-quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Not easy to break, convenient for the plug, ease for use, one side is an integrated plug.
Compared to regular microswitches, these PCB-mounted switches have onboard LEDs – making it easy to see if your End Stop Switches are being triggered. Cut out the guesswork!
1) red line connecting VCC (ramps of +)
2) Connect the black wire GND (ramps of -)
3) Green Line connection SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Pros: Easy to install, the more common styles.
1 x Mechanical Switch PCB
1 x Cable 3-pin 70CM
Sold in the following quantities