This Belt Mount Plate L Type gives an easy way to attach the ends of an open ended belt to V-Slot or other T-Slot extrusion.
The belt is wrapped through the slots and over itself like a typical back pack strap.
To tension the belt, attach one end then tension the belt as a second clip is attached.
Using the perpendicular hole, a M5 screw and nut can be used as a tensioner.
Both G2T and GT3 belts can be secured using these Belt Mounting Plates. These are also called Belt Clips.
- Model: BP0003-1
- Size: 26.5 x 11 x 14mm
- Material: Stainless Steel
- Finish: Raw
Sold in the following quantities:
|$ 0.49||100||$ 49.00|
|$ 0.64||1||$ 0.64|