Description
57 Integrated Servo Motor 180W 3000rpm 0.6Nm
Specifications：
- Quantity:1pc
- Model: IHSV57-30-18-36-01-BY
- Size: 52 x 76 x 148mm (2 x 3 x 5.8″)
- Applicable motor: for iHSV57-30-18-36
- Input voltage: 20~50V DC (Typical Value 36V)
- Power: 180W
- Shaft Diameter: 8mm
- Torque: 0.6NM
- Rated Speed: 3000
- Impedance: 0.53±10%Ω
- Continuous output current: 6A
- Speed response frequency: 50KHz
- Peak torque: 1.71
- Maximum pulse frequency: 250K
- Default rate: 9.6Kbps (Required external conversion interface)
- Cooling mode: Natural cooling or forced air cooling
- Typical applications: CNC, printing, laser, textile machine, etc
Using Environment:
- As far as possible to avoid dust, oil mist and corrosive gases
- Working temperature: 0~+70℃
- Storage temperature: -20℃~+80℃
- Humidity: 40~90%RH
Protection:
- Peak value of over current action value 30A + 10%
- Overload I2t current action value of 300% 5S
- Overheating action value of 80
- Overvoltage action value 65V
- Action value of under voltage 18V
Features:
① Full Closed Loop
- Precise position and speed control to meet the most demanding application requirements.
- Highly robust servo control can adapt to a wide range of inertial loads and frictional load changes.
- High resolution encoder provides accurate position accuracy.
② Low Heating / High Efficiency
- Adjust the current in real time according to the actual load conditions to minimize heat generation.
- The current is almost zero and no heat at rest.
- Close to 100% torque output capacity, maximizing the energy conversion rate in the most compact space, which is in low power-consumption and high efficiency.
③ Smooth and Accurate
- Based on the encoder space vector current control algorithm, it has excellent performance in the full speed range. Even at low speed applications, it can maintain a smooth and quiet operation.
- Ensure accurate positioning both during operation and at rest.
④ Exercise Monitoring
- For some applications where real-time motion has extremely demanding accuracy requirements, JMC servo debugging software provides a simple and practical tool for monitoring the actual trajectory.
- Can be used to monitor commonly used indicators such as actual speed and position error, as a rating system current actual performance.
- The interface of interactive monitoring and tuning can get the most optimized performance output as quickly as possible.
ALM and PEND Signal Output Ports
Control Signal Input Ports
Power Interface Port
| Input voltage | 24~50VDC(36V typical value ) | |
| Continuous output current | 6A | |
| Maximum pulse frequency | 250K | |
| Default rate | 9.6Kbps（Required external conversion | |
| interface） | ||
| Protect | ▸Peak value of over current action value 30A±10%/td> | |
| ▸Overload I2t current action value of 300% 5S | ||
| ▸Overheating action value of 80 | ||
| ▸Overvoltage action value 65V | ||
| ▸Action value of under voltage voltage 18V | ||
| Use environment | occasion | As far as possible to avoid dust, oil mist and |
| corrosive gases | ||
| working temperature | 0~+70℃ | |
| Storage temperature | -20℃~+80℃ | |
| humidity | 40~90%RH | |
| Cooling mode | Natural cooling or forced air cooling | |
Please note: We sell to businesses for bulk order quantity please contact sales@bulkman3d.com for special distribution pricing.
