-
- Sensors , - Switches & Fittings
Inductive Proximity Sensor – LJ12A3-4-Z/BX for 3D Printer
This Inductive Proximity Switch is widely used in automatic control industry for detecting, controlling, and noncontact switching. When proximity switch is close to some target object, it will send out control signal.
Also can be used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
These are a popular choice for 3D Printers, being ideal for …
-
- Controllers , - Electronic Bundle Kit
CNC xPRO V5 Controller Bundle
The CNC xPRO V5 Controller Bundle contains all the hardware for powering your WorkBee, Ox CNC or other CNC machine. The plug and play xPRO V5 brings you the advanced stepping and power of Trianamic drivers along with Wifi and USB interfaces, all powered by a 32 bit processor and wrapped in a beautiful ABS case (with integrated cooling).
The cables …
-
- Electronic Bundle Kit , - Electronics Bundles
MACH3 USB 4-Axis Motion Controller Bundle
Our MACH3 Controller Bundle contains all the hardware for powering and controlling your WorkBee, Ox CNC or other CNC machine.
The cables on this Bundle are designed for machines of the following sizes:
- 500 mm x 750 mm
- 750 mm x 750 mm
- 750 mm x 1000 mm
- 1000 mm x 1000 mm
- 1000 mm x 1500 mm
- 1500 mm x …
-
- Electronic Bundle Kit , CNC Add-On Kits
GRBL Nano High Current Controller Bundle
The GRBL High Current Controller Bundle contains all the hardware for powering your WorkBee, Ox CNC or other CNC machine. The GRBL Nano High Current version is an upgrade to standard GRBL system.
The cables on this Bundle are designed for machines of the following sizes:
- 500mm x 750mm
- 750mm x 750mm
- 750mm x 1000mm
- 1000mm x 1000mm
- 1000mm x 1500mm
…
-
- Switches & Fittings , Electronics
End Stop Switch – PCB Mounted with Connectors and Wire
These End Stop Switch are for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards. They are easy to mount and even easier to connect.
-
- 3D Printing , - Sensors
Optical Endstop
The optical switch is a reliable endstop/switch solution for any type of 3D printer/CNC/3D tool.
-
- Connectors , Electronics
GX12 Male And Female Connector
The GX12 Air Connectors are a great way to connect limit switches, probes and etc to your custom case.
-
- Motor Control , Electronics
Stepper Driver Adapter Module
These Stepper Driver Adapter Modules are awesome! They are a simple plug-in replacement for A4988 or DRV8825 stepper drivers and allow for the connection of an external h
igh powered stepper driver, like our TB6600.Now you can use our CNC Shield or RAMPS boards to control higher power stepper motors!
-
- Power Supplies , Electronics
Switching Power Supply-24V 350W
Mean Well LRS-350 350W AC/DC Single Output Power Supply is a single-output enclosed type power supply with 30mm of low profile design.
-
- Electronic Bundle Kit , CNC Add-On Kits
MACH3 USB 4-Axis UC300 Controller Bundle
Our MACH3 Controller Bundle contains all the hardware for powering and controlling your WorkBee, Ox CNC or other CNC machine.
This UC300 system is an upgrade to our NVUM system.
The cables on this Bundle are designed for machines of the following sizes:
- 500 mm x 750 mm
- 750 mm x 750 mm
- 750 mm x 1000 mm
- 1000 mm x 1000 …
-
- Controllers , - Electronic Bundle Kit
UC300 Mach3 USB 4-Axis Motion Control Board
The UC300 is a high-performace external motion controller for Mach3, with USB port communicated Mach 3 software,supporting standard MPG and Digital Dream MPG.
-
- Power Supplies , Electronics
MeanWell Power Supply 350W 3.3V-48V
Mean Well LRS-350 350W AC/DC Single Output Power Supply is a single-output enclosed type power supply with 30mm of low profile design.
Electronics
Showing 1–12 of 51 results