-
View ProductHardware , Shims and Spacers
Carbon Steel Eccentric Spacers
Our Eccentric Spacers are the perfect solution for adjusting V-Wheels onto V-Slot.
Bulk pricing
From $0.07 to $0.14 a piece
-
View ProductBelts & Pulleys
Eccentric Spacers
Our Eccentric Spacers are the perfect solution for adjusting V-Wheels onto V-Slot.
Bulk pricing
From $0.25 to $0.50 a piece
-
View ProductElectronics
Through-wall Plug-in Terminal Block 2EDGWC / 15EDGWC
5.08 mm / 3.81 mm Male Female Screw Terminal Pair Set PCB CNC Flux Workshop
-
View ProductBearings
F8-16M Miniature Axial Thrust Bearing
These F8-16M 8 x 16 x 5mm Thrust Bearings including two washers and a cage, the washers use high hardness chrome steel which can bear a large load.
-
View ProductBelts & Pulleys
GT2 20T Timing Belt Pulley
This specially designed 20 Tooth Pulley is perfect for your V-Slot automation projects
Two Inner Diameter (ID) Bores are available: 5mm and 6.35mm (1/4″)
Bulk pricing
From $0.47 to $0.78 a piece
-
View ProductWheels
Delrin Dual V Wheel Kit
The Delrin Dual V Wheel Kit is great for use with any V Wheel Linear Guide System.
They can be used with V-Slot Extrusion or Open Rail.
-
View ProductWheels
Mini V Wheel Kit
The Mini V Wheel Kit includes Parts needed to build and mount the Mini V Wheel to the Mini V Plate to create a small form factor linear actuator guide!
-
View ProductWheels
6 in 1 Delrin Dual V Wheel Kit
This Delrin Dual V Wheel Kit is great for use with any V Wheel Linear Guide System.
They can be used with V-Slot Extrusion or OpenRail.
-
View ProductWheels
6 in 1 Xtreme Dual V Wheel Kit
These Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system.
-
View ProductPlates
V-Slot Gantry Plate Set 20 mm
This gantry plate is made from 6063-T6 Aluminum and is a smaller version of the larger V-Slot Gantry Plate.
-
View ProductPlates
C-Beam Double Gantry Plate Bundle Set
This gantry plate is made from 6063-T5 Aluminum and can be used with 4080 C-Beam Profiles, it also has been designed specifically to simplify construction.
-
View ProductCNC Add-On Packs , Electronics
MACH3 USB 4-Axis Motion Controller Bundle
Our MACH3 Controller Bundle contains all the hardware for powering and controlling your WorkBee, Ox CNC or other CNC machine.
The cables on this Bundle are designed for machines of the following sizes:
- 500 mm x 750 mm
- 750 mm x 750 mm
- 750 mm x 1000 mm
- 1000 mm x 1000 mm
- 1000 mm x 1500 mm
- 1500 mm x …
3d printer
Showing 1–12 of 14 results