-
- Belts & Pulleys , - Other Plates
L Type Belt Mount Plate
This Belt Mount Plate L Type gives an easy way to attach the ends of an open ended belt to V-Slot or other T-Slot extrusion.
The belt is wrapped through the slots and over itself like a typical back pack strap.
-
- Belts & Pulleys
GT2 GT3 Open Timing Belt
These GT2/GT3 Timing Belts are made of durable Neoprene and Fiberglass Cords.
Width available are: GT2 5mm/6mm/9mm/10mm or 15mm , GT3 5mm/6mm/9mm/10mm.
Sold by the meter (one continuous length).If your order quantity is 2 then you will receive 2 x 1 meter lengths.
-
- Leadscrews & Nut Blocks
ACME Nut Block For 8mm Lead Screw TR8*2/TR8*4/TR8*8
This 8mm Acme Nut Block serves dual purpose in that it can be mounted to the bottom of a 3 mm/1/8″ plate using M5 nylon insert nuts and 15mm M5 screws or can also be mounted directly to V-Slot utilising two channels with 15mm M5 low profile screws and two tee nuts.
-
- Leadscrews & Nut Blocks , Hardware
Anti-Backlash Nut Block For 8mm/4mm/2mm Lead Screw
The Anti-Backlash Nut Block is a great choice for many projects requiring lead screw linear motion.The pitch and diameter are a perfect combination of high torque and speed.
-
- Belts & Pulleys
GT2 20 Teeth Timing Belt Pulley-Belt Width 6mm/9mm/10mm/15mm
This specially designed 20 Teeth Pulley is perfect for your V-Slot automation projects
Two Inner Diameter (ID) Bores are available: 4mm / 5mm / 6mm / 6.35mm (1/4″) / 8mm
Bulk pricing
From $0.52 to $1.62 a piece
-
- Belts & Pulleys
GT2 Dual Bearing Aluminum Smooth Idler Pulley – Belt Width 6mm/10mm/15mm
This pulley works with 6mm/10mm/15mm width GT2 (2mm) pitch Timing Belt. It works perfectly with the GT2 pulley-belt sets.
Use this with our 20 Teeth GT2 Timing Pulley.
-
- Belts & Pulleys
GT2 30 Teeth Timing Belt Pulley – Belt Width 6mm/10mm
This high quality 30 teeth GT2 aluminium Timing Pulley is perfect for your V-Slot automation projects!
This Pulleys works great with our Nema 23 Stepper Motors.
Three Inner Diameter (ID) Bores are available: 5mm, 6mm, 6.35mm (1/4″) and 8mm
-
- Belts & Pulleys
GT3 Pulley 20 Teeth Timing Belt Pulley – Belt Width 6mm/10mm
This high quality 20 teeth GT3 5 mm/6.35 mm/8 mm aluminium Timing Pulley is perfect for V-Slot automation projects!
This Pulley size is specially designed to make Timing Belt work with a V-Slot system fitting on either side of a 20 mm extrusion profile.
Three Inner Diameter (ID) Bores are available: 5mm, 6.35mm (1/4″) and 8mm
-
- Belts & Pulleys , - Other Hardware
Timing Belt Crimp Clamp
This is a nice metal crimp clamp that will give your looped timing belt connections a finished look.
These are alternative to the ‘zip tie’ method.
-
- Gears and Racks , Transmission
Module 1.0 Gear Rack – External
The External Gear Rack is designed to mount directly to a surface using the multiple holes in the gear rack. This gear rack is ideal for mounting to timber, metal and other surfaces. The holes also line up perfectly for our V-Slot Linear Rail and other standard 20mm profile T-Slot.
The ends of the gear rack are specially designed so that …
-
- Leadscrews & Nut Blocks
ACME Brass Nut-TR8*2/TR8*4/TR8*8
This brass alloy travelling nut (also known as a carriage nut) features a mounting flange with four holes for M3 screws.
This Brass Nut comes in three different starts: 1(2) / 2(4) / 4(8)
-
- Belts & Pulleys
GT2 Dual Bearing Idler Timing Pulley – Belt Width 6mm/10mm/15mm
This pulley works with 6mm/10mm/15mm width GT2 (2mm) pitch Timing Belt. It works perfectly with the GT2 pulley-belt sets.
Use this with our 20 Teeth GT2 Timing Pulley.
Transmission
Showing 1–12 of 41 results