-
Hardware
Linear Rail Shaft Support SHF8/10/12/16
These SHF8/10/12/16 Supports are usable with 8/10/12/16mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place.
-
Hardware
V-Slot ACME Lead Screw Nut Plate
This V-Slot Acme Nut Plate is a perfect fit for any integrated acme screw transmission project.
It can fit into the hollow inserts of 20×40, 20×60 or 20×80 V-Slot.
-
Hardware
T8 Anti Backlash Spring Loaded Nut
This Anti-Backlash Nut features a mounting flange with four un-tapped holes for M3 screws.
This Brass Nut comes in three different starts: 1(2) / 2(4) / 4(8)
-
Hardware
Anti-Backlash Nut Block
The 8 mm Acme Anti-Backlash Nut Block is a great choice for many projects requiring lead screw linear motion.
The pitch and diameter are a perfect combination of high torque and speed.
-
Hardware
Rigid Shaft Coupler Coupling
This high quality aluminium Rigid Coupling is perfect for connecting a Stepper Motor to a Lead Screw.
The rigidity allows for higher torque than our Jaw Couplings.
Sizes available (in mm): 5×8 / 6.35×8 / 8×8
-
Hardware
CNC Jog Knob
Used this Jog Knob to fine tune your machine’s position. Simply attach the jog knob to the 8mm Acme Lead Screw and tighten using the included M4 set screws.
-
Hardware
8mm Acme Lead Screw Nut Block
This 8mm Acme Nut Block serves dual purpose in that it can be mounted to the bottom of a 3 mm/1/8″ plate using M5 nylon insert nuts and 15mm M5 screws or can also be mounted directly to V-Slot utilising two channels with 15mm M5 low profile screws and two tee nuts.
-
Hardware
Flexible Coupling Clamp 5*8mm / 6.35*8mm / 8*8mm
This high quality aluminium Flexible Coupling Clamp is perfect for connecting a Stepper Motor to a Lead Screw.
Sizes available (in mm): 5×8 / 6.35×8 / 8×8
-
Hardware
Flexible Jaw Shaft Coupling Spider
This high quality aluminium Flexible Jaw Coupling is perfect for connecting a Stepper Motor to a Lead Screw.
Sizes available (in mm): 5×8 / 6.35×8 / 8×8
-
Hardware
Internal Insert Module 1.0 Gear Rack
The Internal Gear Rack is designed to slide inside the channel of our 20 profile V-Slot Linear Rail and works with standard 20 profile T-Slot as well. Simply slide the gear rack into the V-Slot Channel and secure it in place using a T-Nut and Bolt on each end.
-
Hardware
Makerlink 90 Hidden Tee Nut
With several options to choose from, the Tee Nut Makerlink family is the quickest way to assemble your Build giving you ample flexibility on the design yet maintaining a strong connection between Linear Rails.
-
Hardware
Makerlink Quad Tee Nut
Quad Tee Nuts Makerlink make a strong end to end connection on any Linear Rail while still allowing Wheels to run along the channel.
Hardware
Showing 25–36 of 44 results