-
View Product- Shims & Spacers , Hardware
Threaded Round Spacers M3/M4/M5/M6/M8
The BULK-MAN 3D Threaded Round Spacers are a fantastic solution for creating sturdy standoffs/spacing’s for your projects.
-
View Product- Screws
M3 Cap Head Screws
These screws can be used in combination with various plates. They fit the M3 threads of the Nema 17 stepper motors so they are useful in many projects.
-
View Product- Cable , - Electronic Hardwares
Cable Saddle Pack
These Cable Saddles are a great way to organise your cables.
With the included M5 8mm Low Profile Screw and Drop-in Tee Nut the Cable Saddle can fit on either V-Slot or Plates. See the photos for some mounting options.
-
View Product- Screws
M5 Cap Head Screws
These screws can be used in combination with various plates. They fit the M5 threads of the Nema 17 stepper motors so they are useful in many projects.
-
View Product- Nuts , - Other Hardware
Four Claws Speaker Nut for Wood
The thread of our four-pronged tee nut is very , clean and accurate. Moreover, the tight threads are not easily deformed and slipped during the rolling process. Our nuts conform to the standardized metric system.
-
View Product- Shims & Spacers
Eccentric Spacers-Stainless steel
Stainless steel Eccentric Spacers are available in various lengths and individually, for your convenience.
These Stainless steel Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail.
Bulk pricing
From $0.14 to $0.52 a piece
-
View Product- Brackets , - Electronic Hardwares
Cable Drag Chain Mounting Bracket
These Cable Drag Chain Mounting Brackets are a great way to fix your Cable Drag Chains to your build. The multiple holes and slots make it really easy to attach a wide variety and size of Cable Drag Chain ends.
-
View Product- Nuts , Hardware
M5 Jam Thin Hex Nut
These M5 Jam Nuts are great for when you need a nut with a thinner (2.9mm) profile or use 2 as lock nuts.
-
View Product- Nuts , Hardware
M5 Double Tee Nut
Use this Double Tee Nut to connect V-Slot and most T-Slot Extrusions end to end or use it on any connection point that has 20 mm spacing (for example, the Actuator End Caps).
-
View Product- Leadscrews & Nut Blocks , Hardware
Anti-Backlash Nut Block For 8mm/4mm/2mm Lead Screw
The Anti-Backlash Nut Block is a great choice for many projects requiring lead screw linear motion.The pitch and diameter are a perfect combination of high torque and speed.
-
View Product- Other Hardware , Hardware
Rubber End Stop
These rubber end stops are perfect for placing on the ends of a linear rail to stop the carriage from running too far.
-
View Product- Brackets
90 Degree Corner Connector
Milled from solid aluminium this Corner connector makes a strong 90 Degree connection for V-Slot Extrusion.
Hardware
Showing 13–24 of 134 results