-
- Nuts , - Other Hardware
Four Claws Speaker Nut for Wood
The thread of our four-pronged tee nut is very , clean and accurate. Moreover, the tight threads are not easily deformed and slipped during the rolling process. Our nuts conform to the standardized metric system.
-
- Other Hardware , Hardware
Rubber End Stop
These rubber end stops are perfect for placing on the ends of a linear rail to stop the carriage from running too far.
-
- Hardware Bundle Kit , - Other Hardware
Spindle Router Mounting Kit 43mm/52mm/65mm/71mm/80mm
This CNC Machine Add-On kit provides all the mounting hardware required to securely attach a router.
This kit includes an Router/Spindle Mount, which has a 43mm,52mm, 65mm, 71mm or 80mm internal diameter perfect for a bosch colt router, and with some spacing can clamp nearly all other router sizes. -
- Electronic Hardwares , - Hardware Bundle Kit
Cable Drag Chain Bundle
The Cable Drag Chain add-on bundle contains all the hardware for mounting Cable Drag Chains on your WorkBee, Ox CNC or other CNC machine to help with cable management.
-
- Electronic Hardwares , - Other Hardware
Cable Drag Chain Interior Opening Type 10x15mm / 15x30mm
This Cable Drag Chain or Wire Carrier works great to keep all your cable neatly out of the way.
These Cable Drag Chains are great because the individual links open.
-
- Belts & Pulleys , - Other Hardware
Timing Belt Crimp Clamp
This is a nice metal crimp clamp that will give your looped timing belt connections a finished look.
These are alternative to the ‘zip tie’ method.
-
- Electronic Hardwares , - Other Hardware
Cable Drag Chain Non-Opening Type 10x10mm / 10x15mm / 10x20mm / 15x20mm
This Cable Drag Chain / Wire Carrier works great to keep all your cable neatly out of the way. These Cable Drag Chains can be shortened by unclipping the links or extended by joining the end pieces.
-
- Other Hardware , Hardware
CNC Jog Knob
Used this Jog Knob to fine tune your machine’s position. Simply attach the jog knob to the 8mm Acme Lead Screw and tighten using the included M4 set screws.
-
- Other Hardware , Hardware
Slot Cover / Panel Holder
Dress up any build with these awesome snap in slot covers! They are the perfect finishing touch to any build.
-
- CNC Table Fixture Tools , - Other Hardware
T-Track Hold Down Clamp T-Slot T-Track
This is a 30 type and 45 type miter track stop woodworking tool for location and fixation, suitable for standard t-track.
-
- Electronic Hardwares , - Hardware Bundle Kit
Cable Drag Chain Bundle for ULTIMATE Bee Machine
The Cable Drag Chain system is installed to protect the wiring of the CNC Machine. Due to the moving axis on the machine, a dynamic cable protection system is required.
- Other Hardware
Showing all 11 results