-
- Electronic Bundle Kit , - Switches & Fittings
CNC Machining Micro Limit Switch Kit
The holes in the plastic of the switch will need to be tapped to M3 size so the included M3 Screws can be used to attach the switch to your project.
-
- Hardware Bundle Kit , CNC Add-On Kits
Spindle Dust Cover Cleaner Dust Protection
Carry forward the engraving machine dust hood, toughness brush, easy to install.
Dust Collector Dust shoe Cover Brush Milling Machine Router Woodworking Tools.
CNC router cover double doorallowing you to work more peace of mind.
Fine workmanship, thick brush encryption, good suction effect. -
- Hardware Bundle Kit , - Other Hardware
Spindle Router Mounting Kit 43mm/52mm/65mm/71mm/80mm
This CNC Machine Add-On kit provides all the mounting hardware required to securely attach a router.
This kit includes an Router/Spindle Mount, which has a 43mm,52mm, 65mm, 71mm or 80mm internal diameter perfect for a bosch colt router, and with some spacing can clamp nearly all other router sizes. -
- Electronic Tools , - Sensors
Plug and Play precise XYZ Touch Probe
The XYZ Touch Probe is used with the end mill to accurately set the 0, 0, 0 position of the work piece.
This very handy tool comes with a 115cm cable that has a pre-terminated alligator clip on the red wire and pre-stripped end on the black wire. The other end of the cable is un-touched and ready to be stripped …
-
- Electronic Hardwares , - Hardware Bundle Kit
Cable Drag Chain Bundle
The Cable Drag Chain add-on bundle contains all the hardware for mounting Cable Drag Chains on your WorkBee, Ox CNC or other CNC machine to help with cable management.
-
- Electronic Tools , - Sensors
Z-Axis Tool Setting Touch Plate Probe
This Touch Plate is used to find the offset to your work piece on your CNC build.
-
- Hardware Bundle Kit , CNC Add-On Kits
Tingle Tension System
The Tingle Tension System allows a Lead screw to be placed under a higher amount of tension which minimises lead screw ‘whip’ allowing faster feed rates to be achieved.
This system utilises F8-16M Thrust Bearings which are designed for pressure to be placed directly on the face of the bearing. For how to install this system please read through the <a ...
-
- Spindle Bundle Kit , CNC Add-On Kits
2.2kW Water Cooled Spindle Motor Bundle
The 2.2kW Water Cooled Spindle Bundle is the most powerful Spindle we offer, which is a must have for anyone who takes their CNC machine serious. This Spindle comes in 110V or 220V. This Spindle is recommended to be used in conjunction with Nema 23 High Torque Stepper Motors.
-
- Hardware Bundle Kit , CNC Add-On Kits
Tingle Tension System with Upgraded Lead Screws for WorkBee CNC
The Tingle Tension System allows a Lead screw to be placed under a higher amount of tension which minimises lead screw ‘whip’ allowing faster feed rates to be achieved.
This system utilises F8-16M Thrust Bearings which are designed for pressure to be placed directly on the face of the bearing. For how to install this system please read through the <a ...
-
- Controllers , - Electronic Bundle Kit
CNC xPRO V5 Controller Bundle
The CNC xPRO V5 Controller Bundle contains all the hardware for powering your WorkBee, Ox CNC or other CNC machine. The plug and play xPRO V5 brings you the advanced stepping and power of Trianamic drivers along with Wifi and USB interfaces, all powered by a 32 bit processor and wrapped in a beautiful ABS case (with integrated cooling).
The cables …
-
- Electronic Bundle Kit , - Electronics Bundles
MACH3 USB 4-Axis Motion Controller Bundle
Our MACH3 Controller Bundle contains all the hardware for powering and controlling your WorkBee, Ox CNC or other CNC machine.
The cables on this Bundle are designed for machines of the following sizes:
- 500 mm x 750 mm
- 750 mm x 750 mm
- 750 mm x 1000 mm
- 1000 mm x 1000 mm
- 1000 mm x 1500 mm
- 1500 mm x …
-
CNC Add-On Kits
4th Axis dividing head cnc Rotation Axis activity tailstock
Tailstock and Rotary A Axis, 4th Axis for CNC Router Engraver Milling Machine
CNC Add-On Kits
Showing 1–12 of 41 results