-
CNC Add-On Packs
CNC Machining Micro Limit Switch Kit
The holes in the plastic of the switch will need to be tapped to M3 size so the included M3 Screws can be used to attach the switch to your project.
-
CNC Add-On Packs
Emergency STOP Button N/C Switch
New Upgrade E-Stop Switch with DC Power Cable for V-slot C-Beam OX CNC Workbee CNC Engraving Machine
Essential to all builds is a big red STOP switch. Easy to see and hit in an emergency.
When pushed it will latch in the down position and must be rotated to be released. This helps prevent accidental re-activation.
-
CNC Add-On Packs
Tingle Tension System
The Tingle Tension System allows a Lead screw to be placed under a higher amount of tension which minimises lead screw ‘whip’ allowing faster feed rates to be achieved.
This system utilises F8-16M Thrust Bearings which are designed for pressure to be placed directly on the face of the bearing. For how to install this system please read through the <a ...
-
CNC Add-On Packs
Spindle Dust Cover Cleaner Dust Protection
Carry forward the engraving machine dust hood, toughness brush, easy to install.
Dust Collector Dust shoe Cover Brush Milling Machine Router Woodworking Tools.
CNC router cover double doorallowing you to work more peace of mind.
Fine workmanship, thick brush encryption, good suction effect. -
CNC Add-On Packs
Workbee CNC Router Mouting Kit 52mm/65mm/71mm/80mm
This CNC Machine Add-On kit provides all the mounting hardware required to securely attach a router.This kit includes an Router/Spindle Mount, which has a 52mm, 65mm, 71mm or 80mm internal diameter perfect for a bosch colt router, and with some spacing can clamp nearly all other router sizes. -
CNC Add-On Packs
Tingle Tension System with Upgraded Lead Screws for WorkBee CNC
The Tingle Tension System allows a Lead screw to be placed under a higher amount of tension which minimises lead screw ‘whip’ allowing faster feed rates to be achieved.
This system utilises F8-16M Thrust Bearings which are designed for pressure to be placed directly on the face of the bearing. For how to install this system please read through the <a ...
-
CNC Add-On Packs
2.5W Blue Light Laser Module
450nm 2500mW DIY Laser engraver accessories 2.5W laser head + eyewear
-
CNC Add-On Packs , Electronics
GRBL UNO R3 Controller Bundle
This GRBL Controller Bundle contains all the hardware for powering and controlling your WorkBee, Ox CNC or other CNC machine.
We recommend using external stepper drivers when pairing with Nema 23 High Torque Stepper Motors in order to utilise them at their maximum capacity.
The cables on this Bundle are designed for machines of the following sizes:
- 500 mm x 750 mm
…
-
CNC Add-On Packs
MPG Manual Pulse Generator with Handwheel
Serial Port Version can be connected to the motion control cards through wiring extension cable.
-
CNC Add-On Packs
400W 12V- 48V DC Air Cooled Spindle Motor
This is the Bulk Man 3D’ 400W Air Cooled Spindle Bundle contains all the hardware for mounting a 400W Air Cooled Spindle on your WorkBee, Ox CNC or other CNC machine.
CNC Add-On Packs
Showing 1–12 of 27 results